gusset造句_gusset例句_gusset用法_V5词典

1. Place identical weld beads on the opposite side of the gusset.: 扣板相同的地点对面焊珠的。

2. Three structures have exhibited cracking at the ends of flange gusset plates.: 已有三个结构在翼缘节点板端部出现了裂纹。

3. Hand wrench wrench gusset, I nod, Air Jordan VII, but cannot help but to henceforth see time and time afresh, that ravishing dashing blue dress man, while, just tin arise another?: 手绞了绞衣袖，我点头，却忍不住一遍又一遍往后看，那个风流倜傥的蓝衣男子，什么时候，才能再出现？

4. Weld the cross-member gusset as shown in the drawings below.: 焊缝交叉成员扣板如下图所示。

5. The great stress concentration also occurs in the gusset plates at the rounded corners of the lower chords and tie beams and the radii of the rounded corners should be appropriately increased.: 节点板在下弦杆与系梁倒角处出现较大的应力集中，可适当增大倒角的半径；

6. External structure: made up by high precision grade steel profiles, aluminum decorative buckle gusset plate.: 外部结构：由高精级钢制型材组合而成，外扣铝制装饰扣板。

7. Next, inspect the gusset for warpage and straighten as needed.: 下一步，检查和整顿的翘曲扣板根据需要的一面。

8. Check the gusset to insure proper alignment.: 检查扣板，以保证适当的调整。

9. Weld the main gusset as shown in the drawing above.: 焊接主要扣板如上所示在提请大会。

10. This Gusset is used for all Thunderbolt variations.: 变化，这折是用于所有迅雷。

11. This hole is placed 16.3 inches behind the front tip of the main gusset as shown.: 这个洞是放置所示16.3英寸主要扣板落后于前面的一角。

12. Once the gusset is bent and flush with the support bow, weld a generous bead on both gusset and support bow as shown.: 一旦折弯曲和弓冲洗的支持，慷慨支持和焊接一珠两折弓上，如图所示。

13. The next choice is a web-gusset, reinforced frame (eg, Thunderbolt/Spitfire), as it is strong, relatively light and compact.: 下一个选择是一个网上折，钢筋混凝土框架（如迅雷/喷火），作为它是强有力的，比较轻，结构紧凑。

14. Upon welding all four beads, the last exposed gusset end is bent to match the contour of the upper support bow.: 焊接后所有四个球，最后暴露折端弯曲的轮廓匹配的弓上的支持。

15. Remember that the main gusset is slightly shortened to accommodate the cross-member gusset.: 记住，主要扣板略有缩短，以满足跨成员扣板。

16. 4 support and steel pipe concrete connection, should not be welded gusset plate steel pipe wall, in order to prevent pipe wall open.: 支撑与钢管砼连接时，不应将节点板焊在钢管管壁上，以防管壁拉开。

17. For the 90 degree Cross-member Trike Design, the Gusset is extended by an inch as shown.: 对于90度交叉成员三轮车的设计，该折是延长1英寸的显示。

18. The only difference for OSS configuration is that the rear of the main gusset is shortened by 1.5 inches.: 唯一不同的开放源码软件配置的是，折后主要是缩短了1.5英寸。

19. The only difference for OSS configuration is that the rear of the main gusset is shortened by 1.5 inches.: 唯一不同的开放源码软件配置的是，折后主要是缩短了1.5英寸。

20. cross beam gusset plate: 横梁节点板

21. These include gusset plates welded to the flange.: 这些包括焊接到翼缘上的节点板。

22. Three structures have exhibited cracking at the ends of flange gusset plates.: 已有三个结构在翼缘节点板端部出现了裂纹。

23. guard frame upper gusset: 货架上角板

24. bumper gusset: 保险杆角撑板

25. Gusset plate: 结点板

26. cross member gusset: 横梁角撑板

27. main truss gusset plate: 主桁架节点板

28. gusset stay: 角板撑条, 结节撑

29. gusset at margin plate: 缘板扣板

考试词汇

CET4 四级词汇 CET6 六级词汇 TEM4 英专四级 TEM8 英专八级考研词汇 GRE 词汇托福词汇雅思词汇

相关应用

单词连连看不规则动词表英语单词大全词汇量测试英语词根表成语词典汉语词典

分类词汇

水果蔬菜花哺乳动物家畜家禽爬行两栖禽鸟鱼类壳类动物昆虫树