polymerization造句_polymerization例句_polymerization用法_V5词典

1. The coordination polymer (EPU Pr 3+ ) was fromed by the reaction of praseodymium chloride with electropolyurushiol polymerization (EPU).: 通过电化学方法合成的聚合漆酚(EPU) ,与氯化镨作用生成聚合漆酚镨配合物膜。

2. Furthermore, the effects of GABE on polymerization kinetics, microstructures of polymer and coupling reaction in the copolymerization of butadiene and styrene are investigated thoroughly.: 进而全面考察了GABE对丁二烯、苯乙烯阴离子共聚合的聚合动力学、聚合物微观结构及偶联反应的影响规律。

3. When exposed to air they absorb oxygen and polymerize (see polymerization), forming a tough coating. Some specialty oils and oil derivatives are also used in leather dressing and textile manufacture.: 当它们一接触空气便立刻吸收氧而聚合成薄层保护膜。有一些特制油和磺化油用于皮衣与织物制造业。

4. In the present work, a simple polymerization strategy allowing the obtainment of molecularly imprinted polymeric fibers to be used in SPME is proposed.: 目前的研究工作提出一种简单聚合技术，通过该技术可得到用于SPME的分子印迹聚合纤维。

5. It is mainly synthesized by two chemical ways: ring-opening polymerization and direct polycondensation.: 合成聚苹果酸的化学方法主要有开环聚合法与直接聚合法。

6. Generally the method mentioned above can be used in various polymerization systems preparing acrylic rubber.: 而且该法作为一种通用的方法，可以用于各种丙烯酸酯聚合体系。

7. It relates to reaction principle of CR with methyl-acrylate graft polymerization, formulation of adhesive solution and manufacturing technology.: 叙述了氯丁橡胶与甲基丙烯酸甲酯接枝聚合的反应原理，胶粘剂溶液的配方以及制造工艺操作过程。

8. Plasma-polymerization of ethylene gives films of complex, uncertain structure.: 乙烯的等离子聚合得到复杂的，无固定结构的薄膜。

9. Due to applying large amount of solvent in dispersion polymerization, solvent problem have become an obstacle in extending this technology.: 由于在分散聚合中要使用大量的溶剂，溶剂回收利用已成为该技术推广的一个首要问题。

10. The influence of reaction temperature, dosage of emulsifiers, emulsifier ratio, dosage of initiator and fluoro monomers on emulsion polymerization process is investigated .: 考察了反应温度、乳化剂用量、乳化剂配比、引发剂用量、有机氟单体等对乳液聚合过程的影响；

11. At least 3 years working experience in polymerization, organic synthesis area.: 至少3年以上聚合、有机合成领域工作经验；

12. Existence state and film structure of polymer emulsion series were related to polymerization process.: 系列聚合物乳液的存在形态及成膜物结构与聚合工艺有关。

13. Temperature, pressure, monomer conversion and copolymer composition could be considered states of a polymerization reactor.: 温度，压力，单体转化率和共聚物组成被认为是聚合反应的状态。

14. A kind of rigid polymer microsphere with core shell structure was synthesized by multi step composite emulsion polymerization technique.: 通过多步复合乳液聚合方法合成了一种具有核壳结构的刚性聚合物微球。

15. This paper discussed the kinetics of high conversion MMA polymerization and MMA/AE copolymerization in the presence of the chain transfer.: 本文研究了在链转移剂存在的情况下MMA均聚体系和MMA—AE共聚体系高转化聚合动力学。

16. There are two types of polymerization reactions: addition and condensation.: 有两种类型的聚合反应：加成和缩合。

17. The measurement on average degree of polymerization in insulation paper with viscometry is introduced, and some testing results are analysed.: 对用粘度法测定绝缘纸的平均聚合度做了简要介绍，并对试验结果进行了分析。

18. On the basis of the theory and the characteristics of the gelation time curves, specific polymerization rate constants as well as successive acid dissociation constants are calculated.: 根据所提理论和胶凝时间曲线的特性数值，计算了所形成的硅酸的各级酸离解常数和聚合作用的比凝速常数的近似值。

19. The preparation of non-crosslinking HPVC/NBR alloy with high degree of polymerization of polyvinyl chloride (HPVC) and acrylonitrile-butadiene rubber (NBR) were studied in this paper.: 本文研究国产高聚合度聚氯乙烯（HPVC）与丁腈橡胶（NBR）共混制备非交联型HPVC/NBR合金。

20. The optimal polymerization conditions of AEA were obtained as follows, polymerization temperature 80℃, molar ratio of acrylic ester to acrylonitrile 4:1, weight fraction of initiator (AIBN or BPO) 3%.: 较佳聚合条件为：聚合温度80℃，丙烯酸酯与丙烯腈摩尔比4：1，引发剂（偶氮二异丁腈或过氧化苯甲酰）质量分数3％。

21. These results proved that there were some interrelation between the rules of interfacial polymerization and the performance of membranes.: 这些结果说明了界面聚合反应的规律和生成膜的分离性能的变化规律基本一致。

22. A high oil-absorption resin of polyacrylic acid system with moderate crosslinking was synthesized by suspension polymerization.: 采用悬浮聚合的方法合成一种交联适中的聚丙烯酸系高吸油性树脂。

23. Based on this non-local polymerization mechanism, the anomalous relation between exposure condition and reflection efficiency is well explained?: 基于这种非局域聚合机制，可以很好地解释曝光条件和反射效率之间的异常关系。

24. Taking polymerization kettle as an example , the concept of edge stress was introduced into failure analysis of pressure vessels.: 以聚合釜为例，对压力容器的边缘应力的概念及其在失效分析中的作用进行了分析。

25. Acrylate copolymer emulsion adhesive is one of the important applications for emulsion polymerization.: 丙烯酸酯共聚物乳液胶粘剂是乳液聚合技术的重要应用之一。

26. Triboelectric spray guns, coating booths, polymerization chambers, recuperative installations, vibrating screens, and transport systems.: 摩擦电喷枪、涂料展位、聚合室、换热装置、振动筛和交通运输系统。

27. Effect of monomer concentration, initiator, cross-linking agent and other factors such as polymerization temperature on the property of acrylate polymer film was discussed.: 讨论了单体浓度、引发剂、交联剂以及聚合温度等因素对皮革填充用丙烯酸酯类聚合物乳液性能的影响。

28. A kind of impact modifier ACR with core - shell structure was synthesized by emulsion polymerization.: 采用种子乳液聚合手段，合成了具有核壳结构的抗冲击改性剂ACR 。

29. The influences of polymerizing technology, emulsifier, reaction temperature, monomer dropping speed, and stirring intensity on microemulsion polymerization were discussed.: 讨论了聚合方法、乳化剂、反应温度、单体滴加速度、搅拌强度等因素对微乳液聚合的影响。

30. The influences of polymerizing technology, emulsifier, reaction temperature, monomer dropping speed, and stirring intensity on microemulsion polymerization were discussed.: 讨论了聚合方法、乳化剂、反应温度、单体滴加速度、搅拌强度等因素对微乳液聚合的影响。

31. With large amounts of monomer, bulk polymerization often takes very turbulent and even explosive form.: 用大量的单体进行本体聚合，其反应常是十分激烈甚至是爆炸式的。

32. Anhydride-type curing agents require the application of heat to promote polymerization.: 酸酐类固化剂则要求加热以促进聚合反应。

33. A hardening agent mixed with the monomer will induce polymerization.: 固化剂与这种单体混合将引起聚合反应。

34. Ketenes, notably dimethyl ketene, readily undergo oligomerization and polymerization.: 烯酮，特别是二甲基烯酮，很容易齐聚和聚合。

35. In general ionic polymerization can be initiated through acidic or basic compounds.: 一般来讲，离子型聚合可以被酸类或碱类化合物所引发。

36. In the polymerization systems studied, segmental rearrangement is the important rate-determining phenomenon.: 在已研究过的聚合体系中链段重排是重要的速度决定步骤。

37. The particles are preferably prepared by the limited coalescence polymerization technique.: 这种颗粒，最好由有限聚结聚合技术来制备。

38. In a tower reactor polymerization may be carried out in two zones.: 塔式反应器中聚合可分为两段进行。

39. These butylraidicals bring about a rapid polymerization of styrene.: 这些丁基自由基促使苯乙烯聚合速度加快。

40. It is the reverse of the propagation step in addition polymerization.: 这一过程是加聚反应历程中链增长步序的逆过程。

考试词汇

CET4 四级词汇 CET6 六级词汇 TEM4 英专四级 TEM8 英专八级考研词汇 GRE 词汇托福词汇雅思词汇

相关应用

单词连连看不规则动词表英语单词大全词汇量测试英语词根表成语词典汉语词典

分类词汇

水果蔬菜花哺乳动物家畜家禽爬行两栖禽鸟鱼类壳类动物昆虫树